DLINK DWL-8500AP Access Point Drivers for Windows Download
DLINK DWL-8500AP Access Point Driver
Wireless Specifications: The DWLAP is a dual band wireless access point that operates on GHz and the 5 GHz range. In the lower frequency band it. SG broadband routers & modems - D-Link DWLAP Unified Wireless PoE Access Point, Simultaneous Dual Band a/g. The DWLAP Wireless Switching AG Access. Point is a high-performance wireless access device that provides up to Mbps transmission rates 1.
|Supported systems:||Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit|
|Price:||Free* [*Free Regsitration Required]|
DLINK DWL-8500AP Access Point Driver
PoE support for Easy Deployment For installations in areas where power outlets are not readily available, the access point integrates The wireless switch will provide power as far as m away via standard Ethernet cabling. Maximum wireless signal rate based DLINK DWL-8500AP Access Point IEEE standard Actual data throughput will vary.
- D-Link Unified Wireless PoE Access Point DWLAP B&H Photo
- DWLAP Unified Wireless Dual-Band PoE Access Point D-Link UK
- D-Link DWL-8500AP
- D-Link DWL-8500AP overview
Network conditions and environmental factors may lower actual data throughput rate. MAC address filtering, SSID Broadcast Disable can be configured from the switch to set up security and limit outsiders' access to the internal network.
Rogue AP detection The DWLAP can be configured to DLINK DWL-8500AP Access Point leave its operational channel and scan other channels within both frequency ranges, allowing the wireless switch to monitor the environment and detect rogue APs. With WPA Personal mode, the device provides authorization to clients requesting access to the network.
DLINK DWL-8500AP Access Point the WPA Enterprise mode, the device lets the enterprise security infrastructure authenticate the user; this lets the enterprise deploy wireless LANs without compromising the security.
The access point also supports Captive Portal solution as an additional security DLINK DWL-8500AP Access Point. With this feature, the wireless clients need to get another level of authentication after connecting to the wireless network. Once the client is connected to the network, the user needs to launch the web browser and authenticate themselves at an individual level.
Once authenticated by the Captive Portal, the user can access the network resources. The device can be configured in standalone mode DLINK DWL-8500AP Access Point in managed mode. In the standalone mode, it acts as an independent access point used to setup the wireless network.
DLINK DWL-8500AP Access Point device becomes the hub to which DLINK DWL-8500AP Access Point wireless clients connect to access the enterprise network or the internet. In this mode every aspect of the wireless network and the access point needs to be configured manually by the administrator. As a managed device, the access point is connected to a wireless controller switch as a part of the unified switching solution from D-Link.
The switch is pre-configured with the desired settings for the wireless network. As soon as the DWLAP is configured in this mode and hooked up the switch, the configuration is automatically downloaded to it.
This saves the network administrators a lot of time and effort. Besides, being managed by the switch, all the access points connecting to it in this mode will have the same configuration DLINK DWL-8500AP Access Point homogeneous wireless LAN for the enterprise users. In the managed mode, the access point and the unified switch setup provides two distinct advantages.